TEKNOLAC PRIMER 2275-10L
- Corrosion protective
Fast drying alkyd primer.
Primer for rotors - / stator component from ventilators.
Fast drying, good corrosion protection, for use in automatic Suitable for spraying, heavy metal free.
Remove from the surface any contaminants that might be detrimental to surface preparation and coating. Remove also water-soluble salts by using appropriate methods. The surface should be prepared as follows: STEEL SURFACES: Remove the skin and rust by blasting until Degree of preparation Sa 2½ (ISO 8501-1) Roughening of thin sheet metal surfaces Improves the adhesion of the paint to the substrate. OLD, OVERLATABLE SURFACES: Contaminants containing the (E.g., fats and salts). The surface should be Dry and clean. Old color surfaces showing the maximum Overcoating interval have to be roughened additionally.
|Solids||abt. 45 % by volume|
|Weight solids||abt. 68 % by weight|
|Volatile organic compound (VOC)||abt. 470 g/l|
|Recommended film thickness||The recommended minimum film thickness is 30 µm dry film.|
|Drying time – dust free||after 20 min|
|Drying time – touch dry||after 1 h|
|Drying time – forced drying||50°C / 30 min|
|Drying time - overcoatable||after over night by +5°C / after 4 h by +23°C|
|Clean up||TEKNOSOLV 6750|