INFRALIT PE 8316-05
Zinc polyester powder
- Corrosion protective
- Powder coating
INFRALIT PE 8316-05 is a TGIC-free polyester powder coating based on polyester resin. At elevated temperatures the powder melts, cures and forms the final paint film.
INFRALIT PE 8316-05 is mainly suitable for use on steel surfaces blast-cleaned to preparation grade Sa 2½, when the constructions will be exposed to severely corrosive environments. The product is designed mainly for use as a primer.
INFRALIT PE 8316-05 forms a mechanically resistant paint film that has good anticorrosive properties. The surface can be overcoated with INFRALIT powder coating or some other suitable paint. Teknos sales department should be contacted if the intention is only to melt the primer before applying the top coat. Overbaking of INFRALIT PE 8316-05 powder coating must be avoided when overcoating. If the stoving temperature of the primer is higher than 205°C, the adhesion between the coats may be diminished. We recommend that intercoat adhesion is checked when direct fired gas oven is used in two layer painting.
|Recommended film thickness||Min. 60 µm above the peaks of the surface profile, max. 140 µm above the peaks of the surface profile.|
|Curing time||15 min/190°C (metal temperature)|