FERREX
Anticorrosive paint
- Corrosion protective
- Special adhesion
- Solvent-borne
FERREX is an anticorrosive paint, which contains effective anticorrosive pigmentation. Finish: matt.
Use: Anticorrosive paint for steel surfaces and aluminium outdoors and indoors. The adhesion of FERREX on zinc-coated (galvanized) surfaces as well as on prefabrication primers is also good. The pigmentation of FERREX effectively prevents underfilm corrosion.
Technical data sheet
Surface preparation
Surfaces to be painted are cleaned from dirt, grease, oil and other impurities. RENSA STEEL washing agent, solvent wiping etc. is used for cleaning.
Rust and corrosion are removed from the surfaces using scraping, wire-brushing, sanding, blast-cleaning or other suitable method.
Old, glossy surfaces are roughened using sanding, blast-cleaning or other suitable method. Loose and poorly adherent old paint or coating is removed.
Aluminium surfaces are roughened using sanding, blast-cleaning ot other suitable method.
Application
Stir thoroughly before use.
Application conditions
The surface to be treated must be dry. It is not recommended to paint surfaces that are above +50°C. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%.
Application methods
Suitable airless nozzle size 0.011 - 0.015".
| Solids | abt. 43 % by volume |
|---|---|
| Volatile organic compound (VOC) | EU VOC limit value (kat A/i): 500 g/l. The product's VOC: max. 500 g/l. |
| Gloss | Matt |
| Density | abt. 1.25 g/ml |
| Practical spreading rate | 8 - 10 m²/l depending on application technique, substrate and the quality of surface. |
| Drying time – touch dry | 3 h |
| Thinner | TEKNOSOLV 1639 |
| Clean up | TEKNOSOLV 1639 |
| Colours | Red, grey, black and white. |
| Packages | 0.33 l, 1 l, 3 l, 10 l. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | Finnish Key Flag |