TEKNOPLAST PRIMER 7
- Chemical resistant
- Wear resistant
TEKNOPLAST PRIMER 7 is a two-pack solvent-borne epoxy primer with low solvent content.
Used as a priming coat in abrasion and chemical resistant Epoxy Coating Systems K55, K58, K63, K65, K79, K85 and K86 on blast-cleaned steel. Can also be used for priming zinc, aluminium, thin-plate and acid-proof steel surfaces and as an intermediate coat over zinc epoxy and zinc silicate primers.
The paint is quickly overcoatable and is therefore suited to a fast painting tempo. It is also suitable for application by twin-feed spray. The paint film withstands heavy abrasion, oils, grease, solvents and chemical splashing. Provides highly effective protection of metal structures in a wide range of aggressive environments and climates. The paint comes up to the specifications of Swedish Standard SSG 1021-GA. Either TEKNOPLAST PRIMER WINTER HARDENER 7399 (data sheet no. 1320) or TEKNOPLAST WINTER HARDENER 7212 (data sheet no. 1317) is to be used when painting at temperatures below +10°C .
|Solids||abt. 70 % by volume|
|Total mass of solids||abt. 1200 g/l|
|Volatile organic compound (VOC)||abt. 300 g/l|
|Pot life||3 h (+23 °C)|
|Mixing ratio||4:1 by volume (comp. A : comp. B)|
|Hardener||Comp. B: TEKNOPLAST HARDENER|
|Drying time – dust free||after 1 h|
|Drying time – touch dry||after 4 h|
|Drying time – fully cured||after 7 d|
|Clean up||TEKNOSOLV 9506 or TEKNOSOLV 9530|
|Approvals & certificates||SSG 1021-GA|