Water-borne primer

  • Water-borne
  • Primer

Water-borne pigmented primer for minimising discolouration of knots. For pine and spruce wood panels. Only for interior use.

For pine wood panels. Only for interior use.

Low pH.

Safety data sheet


Stir the product homogeneous before use.

Application conditions

TEKNOCOAT AQUA PRIMER 1867-00 is normally sprayed in one layer, 90-150 g/m². Best resistance against knot discoloration is achieved when applying two thin layers compared to one thick layer. Only flatter or very slight sanding is recommended.


Protected against frost and not above +30°C. Keep containers tightly closed after use. The storage stability is shown on the label.
Solids abt. 37 % by volume
Weight solids abt. 51 % by weight
Volatile organic compound (VOC) abt. 4 g/l
Tinting system Teknocolor
Drying time – forced drying +50°C / 50% RH -dry to handle: 20 min. after cooling
Thinner Water.
Clean up Water. Low pH, very important with careful cleaning of equipment before and after use.
Colours NCS S 0502-Y. NCS S 2502-Y.
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet.