RAPIFILL 1080-00

Solvent-based 2C filler for interior use

  • 2-component
  • Solvent-borne
  • Filler

RAPIFILL 1080-00 is a very fast-drying, solvent-based 2C filler with excellent filling properties and very good levelling properties. As it is particularly viscous, the product is especially suitable for applications on vertical surfaces.

When used as a flame retardant coating for seagoing ships according to SOLAS (International Convention for the Safety of Life at Sea) 74/88 Reg. II-2/3, II-2/5 and II-2/6, latest version, IMO Resolution MSC.36(63)-(1994 HSC Code)7, IMO Resolution MSC.97(73)-(2000 HSC Code)7, this product can only be combined with other approved and technically suitable products. A risk assessment has been carried out according to Directive 2014/90/EU, Annex II, Section 3. The cured and dried coating poses neither a physical nor a health hazard, nor a hazard to the environment. When used in ship interiors, the maximum total product application quantity of 200 g/m2 should never be exceeded.

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip


Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.


Storage temperature is +5°C - +30°C. Store in a tightly closed container.

On MDF boards with a density of below 700 kg/m3 the surface must be pre-isolated with ALPOLAN UNIVERSALGRUND 2420-00.
Weight solids abt. 64 % by weight
Volatile organic compound (VOC) abt. 501 g/l
Pot life 3 h (+23 °C)
Mixing ratio 10:1 by volume (comp. A : comp. B)
Hardener Comp. B: UNIPUR 279 1910-99
Theoretical spreading rate 180 g/m²; 5.5 m²/kg
Density abt. 1.43 g/ml
Drying time – dust free after 10 minutes
Drying time – touch dry after 30 minutes
Drying time - overcoatable after 2-3 hours
Thinner VERDÜNNER 1300-98, VERDÜNNER 0950-98.
Clean up Wash the equipment immediately after use. VERDÜNNER 1300-98 or UNIVERSALREINIGER U 8600-98.
Colours White.
Safety markings See safety data sheet.
Approvals & certificates IMO FTPC Part 5,Marine Equipment Approval (Module B)