BIORA AIR

Matt air purifying interior wall paint

  • Water-borne

Air purifying water-borne acrylate paint for dry interior areas. Purifies indoor air by removing aldehydes and changing them into harmless compounds. Paint is easy to apply and it covers well. Good wear resistance. Finish: matt.

Suitable objects at homes are eg. living rooms, bedrooms and hallways and in public spaces and premises eg. hotel rooms and corridors, offices and class rooms. BIORA AIR wall paint can be applied to primed concrete, plaster, stopper, brick and building board surfaces. BIORA AIR is also suitable for repainting old alkyd and dispersion paint coats.

Technical data sheet

Safety data sheet

Product colour chart

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash. Spray filler ceilings, which are not waterproof, are recommended to be primed with solvent borne primer e.g. FUTURA 3 Adhesion primer. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed.

Application

Prime concrete, plaster, stopper, brick and building board surfaces with BIORA PRIMER primer and ceiling paint. Steel surfaces are primed with FERREX AQUA Anticorrosive paint. Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray. Suitable nozzle for airless spray is 0.017 - 0.021".

Application conditions

The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.

Maintenance

The final forming of the paint film takes abt. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the painted surface must be treated with care. The painted surface can be cleaned by wiping with a neutral (pH 6 - 8) detergent. Detergent and dirt are removed by wiping and/or rinsing the surface with clean water. Use a cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion. Follow the dilution and other instructions of the detergent producer when using detergents.

Storage

Must not freeze.
Solids abt. 37 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l.
Gloss Matt
Tinting system Teknomix
Density abt. 1.3 g/ml
Practical spreading rate Applied once onto a smooth surface: 8 - 10 m²/l
Drying time – dust free after ½ hour
Drying time - overcoatable after 1 hour
Thinner Water.
Clean up Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use.
Washability and wear resistance Wear resistance of the painted surface is good. Wet scrub resistance, class 1 according to EN 13300 (ISO 11998).
Packages Base paint 1 and 3: 0,9 L, 2,7 L, 9 L.
Safety markings See safety data sheet. CHEMICAL PROPERTIES AND SAFETY The product is not classified as hazardous according to Regulation (EC) 1272/2008. Recommended safety precautions when using the product: Avoid unnecessary skin contact. Use work clothes to protect against paint splashes. Use eye protection to protect againts paint splashes. During spray application avoid breathing spray mist. Use respirator, filter type A P. More information and Safety data sheet: Product's product page www.teknos.com
Approvals & certificates M1 classification,Nordic Ecolabel