Epoxy Primer

  • Corrosion protective
  • 2-component
  • Solvent-borne
  • Intermediate
  • Primer

TEKNOPOX PRIMER 60-00 is a fast curing two-pack epoxy primer containing anticorrosive pigment - zinc phosphate. The product cures also in low temperatures (above -10ºC).

The paint is used as anticorrosive coating, primer or intermediate coat in epoxy or epoxy-polyurethane painting systems. It can be used for fast recoating with another layer. In inner conditions can be used as self-contained painting system.

The matt surface, mechanically resistant and well attached to subjects. The surface is resistant to atmospheric conditions. Exposed to direct sun radiation, the surface may chalk or change the shade.

Solids abt. 60 % by volume
Total mass of solids abt. 1010 g/l
Volatile organic compound (VOC) abt. 370 g/l
Pot life 6 h (+23 °C)
Mixing ratio 11:1 by volume (comp. A : comp. B)
Hardener Comp. B: TEKNOPOX HARDENER 7460
Gloss Matt
Drying time – dust free after 30 min
Drying time – touch dry after 3 h 30 min
Drying time – fully cured after 5 days
Thinner Not needed. IF needed (eg. rise in viscosity) use TEKNOSOLV 9506.
Clean up TEKNOSOLV 9506