Primer for spray application

  • Water-borne
  • Primer

ANTISTAIN AQUA 2901-00, a water-borne industrial primer for new wood designated for exterior use such as windows and doors.

ANTISTAIN AQUA 2901-00 can be applied by Airmix or Airless spraying systems either by hand or in automated spraying facilities. ANTISTAIN AQUA 2901-00 will typically be applied on hardwood, which for non-durable hardwood has been pretreated with a Wood Preservative. Exterior durability of coating systems including ANTISTAIN AQUA 2901-00 is typically documented according to EN 927-2.

ANTISTAIN AQUA 2901-00 reduces surface discoloration caused by tannins in hardwood.

Surface preparation

The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016. Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance. The use of ANTISTAIN AQUA 2901-52 as a pre-treatment, prior to spraying with ANTISTAIN AQUA 2901-00, will improve the wetting of open porous substrates.

Application conditions

Stir thoroughly before use. Optimum temperature for products and surroundings: +18°C - +22°C. Optimum relative air humidity: Approx. 50%. Wet film range 125-200 µm.


Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
Volatile organic compound (VOC) abt. 64 g/l
Theoretical spreading rate 5-8 m²/l
Clean up Water.
Colours White and Antique white.
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet.