OLITERM 25
Alkyd-silicon paint
- Heat resistant
- 1-component
- Solvent-borne
- Topcoat
OLITERM 25 is a heat resisting enamel based on silicon modified alkyd resin. Pigmented with aluminium. Coat with gloss, good adhesion to the substrate, good mechanical properties. Resistant to atmospheric conditions and temperatures up to 200°C. Under the influence of high temperature the colour of coat may changes.
As finishing coating for construction operated in urban and industrial atmosphere, steel construction exposed to temperature up to 200°C e.g. heating pipelines, chimney shafts. The paint dries at room temperature.
Technical data sheet
Surface preparation
Before cleaning of surface, it is recommended to wash it with water with addition of OLICLEAN 123 and then rinse with fresh water.
Coat of OLITERM 22 paint or GALWASOL 19 must be dry, free from corrosion, grease, dust and any contaminations.
Additional instructive information for surface preparation can be found in standards EN ISO 12944-4 and ISO 8501-2.
Application
Stir thoroughly before use.
Apply by airless spray, brush, roller or conventional spray.
Suitable airless nozzle size 0.013 - 0.015".
Application conditions
The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%. Additionally, the temperature of the surface to be treated and the product must be at least +3°C above the dew point of the ambient air. Adequate ventilation during application and drying period is recommended.
Storage
The storage stability is shown on the label. Store in a cool place and in tightly closed containers.
| Total mass of solids | abt. 560 g/l |
|---|---|
| Volatile organic compound (VOC) | abt. 480 g/l |
| Gloss | Gloss |
| Practical spreading rate | The values depend on the application technique, surface conditions, overspray, etc. |
| Drying time – dust free | after 4,5 h |
| Drying time – touch dry | after 5 h |
| Thinner | TEKNOSOLV 724 |
| Clean up | TEKNOSOLV 724 |
| Colours | TO-850 aluminium |
| Safety markings | See safety data sheet. |