AQUACOAT 80
Varnish
- Lacquer
AQUACOAT 80 is a water-borne acrylic varnish.
It is used for dip varnishing of technical wood pieces. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.
Technical data sheet
Surface preparation
The surface must be clean and dry. The moisture content of the wood is to be below 20%.
Application
Stir thoroughly before use.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 80%.
Storage
The storage stability is shown on the label. Store in a tightly closed container. The best storage temperature is +10°C - +25°C. Must not freeze.
| Solids | abt. 36 % by volume |
|---|---|
| Total mass of solids | abt. 400 g/l |
| Volatile organic compound (VOC) | abt. 17 g/l |
| Gloss | Gloss |
| Practical spreading rate | The values depend on the application technique, surface conditions, overspray, etc. |
| Drying time – dust free | 40 min |
| Drying time – touch dry | 45 min |
| Thinner | Water. |
| Clean up | Water. |
| Colours | Clear. |
| Safety markings | See safety data sheet. |