TEKNOSPRO BINDER
Dust binder
- Water-borne
TEKNOSPRO BINDER is a water-borne, colourless, acrylic-based dust binder for walls and ceilings indoors.
TEKNOSPRO BINDER is suited for dust binding of untreated concrete, brick, building blocks, building boards etc. indoors. Colourless TEKNOSPRO BINDER doesn't colour or darken treated mineral surfaces. The treated surface can be overcoated with Teknos water-borne indoor paints, if needed.
Technical data sheet
Safety data sheet
Product colour chart
Surface preparation
The surface to be treated must be clean and dry. TEKNOSPRO BINDER is a product which is ready to use and which can be tinted to transparent shades, if needed. This attention colouring helps to ascertain that a sufficient dust binding film has been applied.
Application
Application by brush, roller or airless spray once or twice. Suitable nozzle for airless spray is 0.013 - 0.017".
Application conditions
The surface to be treated must be dry. The temperature of the ambient air and the surface shall be above +5°C and the relative air humidity below 80%.
Storage
Must be stored tightly closed and kept cool. MUST NOT FREEZE.
| Solids | abt. 14 % by volume |
|---|---|
| Volatile organic compound (VOC) | EU VOC limit value (kat A/h): 30 g/l 2010. The product's VOC: max. 30 g/l. |
| Tinting system | Teknomix |
| Density | abt. 1 g/ml |
| Practical spreading rate | Applied once onto a smooth surface: abt. 10 m²/l |
| Drying time – dust free | ½ h |
| Thinner | Water. |
| Clean up | Wash the equipment immediately after use with detergent and warm water. |
| Packages | 9 l, 18 l. |
| Safety markings | See Safety Data Sheet. |
| Approvals & certificates | M1 classification |