Ready-to-use, water-borne filler for carpentry work.
Used for filling on wooden interior surfaces, e.g. doors and furniture. Also suitable for primed metal surfaces.
SILORA A has good adhesion and filling capability, and it gives a very smooth surface.
Technical data sheet
Safety data sheet
Other product specific documents
Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Brittle substrates and untreated wooden and metal surfaces must be primed before the filler is applied.
Apply the filler by trowel. The number of layers is dependent on the surface roughness. The dried filler can be painted or wall-papered. Before wall-papering the filler surfaces must be primed with adhesive. The use of protective mask for eyes and face is recommended when grinding the filler.
The surface to be treated must be dry. The temperature of the air, the surface and the filler shall be above +5 °C and the relative humidity of the air below 80 % during the time of application and drying.
To be stored in a cool place. Must not freeze. Storage stability is 1 year in unopened package.
|Solids||abt. 82 % by volume|
|Volatile organic compound (VOC)||The product is not included in the EU VOC directive.|
|Layer thickness||0 - 2 mm|
|Density||abt. 1.8 g/ml|
|Packages||0,4 l, 3 l.|
|Safety markings||See Safety Data Sheet.|
|Approvals & certificates||CE marking|