FUTURA 15
Furniture paint

- Wear resistant
- Solvent-borne
High performance, quick-drying urethane alkyd paint that is thixotropic and therefore easy to apply. Finish: semi-matt.
Painting of wooden and primed metal detached furniture indoors.
Technical data sheet
Safety data sheet
Product colour chart
Surface preparation
The surface to be painted must be clean. Wash previously painted surfaces with RENSA SUPER paint cleaner. Remove loose and poorly adherent paint coats. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Prime unpainted wooden, chipboard and also surfaces that have been painted with alkyd, oil or acid-curing paint with FUTURA 3 Adhesion primer. Stop up pits and crevices with SILORA A Carpentry Filler. Matt down the surfaces and remove the dust. Remove loose old paint from interior metal surfaces by scraping and wire-brushing. Clean off all rust with wire-brush. Wash the surfaces with e.g. TEKNOSOLV 1621. Prime steel surfaces with FUTURA 3 Primer, zinc-coated and aluminium surfaces with KIRJO. Topcoat all metal surfaces with 1 - 2 coats of FUTURA 15.
Application
The paint is thixotropic and must be stirred thoroughly before use. Apply by brush, roller or spray. Suitable airless spray nozzle is 0.011 - 0.013". When applying by spray, thin the paint 5 - 15 % by volume with TEKNOSOLV 9500. When a second coat is required, it can be applied on the following day.
Application conditions
The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5 °C and the relative air humidity below 80 %.
Solids | abt. 50 % by volume |
---|---|
Volatile organic compound (VOC) | The product is not included in the EU VOC directive. |
Gloss | Semi-matt |
Tinting system | Teknomix |
Density | abt. 1.3 g/ml |
Practical spreading rate | Applied once onto a smooth surface: 8 - 12 m²/l. |
Drying time – touch dry | after 3 hours |
Drying time - overcoatable | the following day |
Thinner | TEKNOSOLV 1621 (solvent naphtha) or in spray application TEKNOSOLV 9500 |
Clean up | TEKNOSOLV 1621 (solvent naphtha) |
Colours | The paint is included in the Teknomix tinting system. |
Packages | Base paints 1 and 3: 0,45 L, 0,9 L, 2,7 L, 9 L. |
Safety markings | See Safety Data Sheet. NOTE! Because of the danger of self-ignition, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended. |
Approvals & certificates | Finnish Key Flag |