EPINOX WOOD PRIMER 12

Epoxy varnish

  • Water resistant
  • 2-component
  • Primer
  • Solvent-borne

Two components, epoxy transparent varnish, cured with polyaminoamides.

For priming of wood before top coating. Also suitable as a varnish for self-protection of surface.

Hard and flexible coating, with outstanding adhesion to surfaces.

Surface preparation

Fill cavities in the substrate using epoxy putty BOSMAN 1. Wash the surface with water containing OLIVA CLEANER - should be dry, salt-, dust-, oil- and grease-free. At the first layer of lacquer is preferably diluted by adding 20% Thinner 564.

Application

Airless spray, brush. Airless spray parameter - nozzle size: 0,33 - 0,43 mm, nozzle pressure: 10 - 12 MPa.

Application conditions

Minimum surface temperature: +5°C and at least 3°C higher than dew point, relative air humidity below 85%, good ventilation.
Solids abt. 40 % by volume
Volatile organic compound (VOC) abt. 540 g/l
Pot life 8 h (+23 °C)
Mixing ratio 100:40 by volume (comp. A : comp. B)
Hardener Comp. B: UTWARDZACZ 897
Gloss Gloss
Recommended film thickness Dry film (µm) 20. Wet film (µm) 50.
Drying time – dust free after 1 h
Drying time – touch dry after 5 h
Drying time - overcoatable after 8 h
Thinner Not recommended. When necessary use TEKNOSOLV 564.
Clean up TEKNOSOLV 564
Packages Base: 0,52 l Hardener: 0,21 l
Safety markings See Safety Data Sheet