FUTURA 3

Adhesion primer

  • Insulating
  • Special adhesion
  • Solvent-borne

A multipurpose alkyd primer that can also be used both as primer, primer surfacer, adhesion primer and intermediate coating. Finish: full-matt.

FUTURA 3 is intended for priming of surfaces indoors and outdoors, such as furniture, chipboard, fibre board and gypsum board. Also for priming of metal surfaces indoors (also light metal and galvanized surfaces) as well as glass, ceramic tiles, PVC plastic and acid-curing paints indoors. Can also be used for painting ceilings.

Technical data sheet

Safety data sheet

Surface preparation

Clean the surface from loose matter, dirt and dust. Wash previously painted surfaces with RENSA SUPER paint cleaner. Remove rust from the metal surfaces with wire-brush. Remove loose and poorly adherent paint coats. Remove all possible latex paints. Matt down hard or gloss surfaces by sanding and thereafter remove the dust.

Application

Before use stir the paint thoroughly. For painting wooden surfaces dilute the paint if needed 5 - 10 % with TEKNOSOLV 1621. Apply by brush, roller or spray. Suitable airless spray nozzle is 0.013 - 0.015". When applying by spray, thin the paint 5 - 15 % by volume with TEKNOSOLV 9500. The topcoating is applied with FUTURA Top Coats or with Dispersion Paint after the primer has dried for 6 hours.

Application conditions

The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5 °C and the relative air humidity below 80 %.
Solids abt. 50 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/i): 500 g/l. The product´s VOC: max. 500 g/l.
Gloss Full-matt
Tinting system Teknomix
Density abt. 1.4 g/ml
Drying time – dust free after 2 hours
Thinner TEKNOSOLV 1621 (solvent naphtha) or in spray application TEKNOSOLV 9500
Clean up TEKNOSOLV 1621 (solvent naphtha)
Packages White: 0,45 L, 0,9 L, 2,7 L, 9 L. Base paint 3: 0,45 L, 0,9 L, 2,7 L, 9 L
Safety markings See Safety Data Sheet. NOTE! Because of the danger of self-ignition, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended.