2. TEKNOROAD 250

TEKNOROAD 250

Road marking paint

»
  • 1-component
  • Solvent-borne

TEKNOROAD 250 is a fast-drying, matt alkyd paint that is resistant to weather and light.

Used on asphalt and on oil gravel for marking of roads and related carriageways, parking places, air fields and other areas with traffic. TEKNOROAD 250 dries extremely fast. When the temperature is above +20°C, traffic can be allowed on the painted surfaces after 5 minutes without causing damage to the paint. The drying is slower at lower temperatures but even then it is fast enough for the paint to be used when the temperature is e.g. +5 - +10°C. TEKNOROAD 250 meets the quality requirements for road marking paints prescribed by the Finnish Transport Infrastructure Agency.

Surface preparation

The surface to be treated must be dry and clean. Loose matter that may weaken adhesion, such as sand, gravel, moss and other kind of growth, poorly adherent previous markings, oil and grease must always be carefully removed before applying the marking material.

Application

Stir thoroughly before use. NOTE! Make sure, that mixer's motors are Ex-protected, because the paint is highly flammable. To achieve retro-reflectance, it is recommended that glass beads are strewn on the fresh paint coat.

Storage

The storage stability is shown on the label. Store in a cool place and in tightly closed containers.
Volatile organic compound (VOC) white: approx. 380 g/l yellow: approx. 400 g/l black: approx. 350 g/l
Gloss Matt
Theoretical spreading rate The theoretical spreading rate is 3 - 4 m²/l when using the recommended film thicknesses.
Thinner TEKNOSOLV 4039
Clean up TEKNOSOLV 4039
Colours White, yellow and several special colours. White and yellow come up to the requirements for brightness and colour prescribed by the Finnish Transport Infrastructure Agency.
Safety markings See safety data sheet.
Approvals & certificates Finnish Transport Infrastructure Agency