TEKNOPLAST PRIMER 2
Epoxy primer
- Chemical resistant
- Wear resistant
- 2-component
- Solvent-borne
- Intermediate
- Primer
TEKNOPLAST PRIMER 2 is a two-pack epoxy primer pigmented with aluminium.
Used as primer for blast-cleaned surfaces on paper machines in abrasion and chemical resistant epoxy and polyurethane coating systems. Can also be used for priming zinc, aluminium, thin-plate and acid-proof steel surfaces and as an intermediate coat over zinc epoxy and zinc silicate primers.
The paint is quickly overcoatable and is therefore suited to a fast painting tempo. The paint can also be applied by twin-feed spray. The paint film withstands heavy abrasion, oils, grease, solvents and chemicals. The paint comes up to the specifications of Swedish Standard SSG 1021-GA.
| Solids | abt. 53 % by volume |
|---|---|
| Total mass of solids | abt. 880 g/l |
| Volatile organic compound (VOC) | abt. 440 g/l |
| Pot life | 4 h (+23 °C) |
| Mixing ratio | 4:1 by volume (comp. A : comp. B) |
| Hardener | Comp. B: TEKNOPLAST HARDENER |
| Gloss | Semi-matt |
| Drying time – dust free | after 1 h |
| Drying time – touch dry | after 3 h |
| Drying time – fully cured | after 7 d |
| Thinner | TEKNOSOLV 9506 |
| Clean up | TEKNOSOLV 9506 or TEKNOSOLV 9530 |
| Approvals & certificates | SSG 1021-GA |