Epoxy primer

  • Chemical resistant
  • Wear resistant
  • 2-component
  • Solvent-borne
  • Intermediate
  • Primer

TEKNOPLAST PRIMER 2 is a two-pack epoxy primer pigmented with aluminium.

Used as primer for blast-cleaned surfaces on paper machines in abrasion and chemical resistant epoxy and polyurethane coating systems. Can also be used for priming zinc, aluminium, thin-plate and acid-proof steel surfaces and as an intermediate coat over zinc epoxy and zinc silicate primers.

The paint is quickly overcoatable and is therefore suited to a fast painting tempo. The paint can also be applied by twin-feed spray. The paint film withstands heavy abrasion, oils, grease, solvents and chemicals. The paint comes up to the specifications of Swedish Standard SSG 1021-GA.

Solids abt. 53 % by volume
Total mass of solids abt. 880 g/l
Volatile organic compound (VOC) abt. 440 g/l
Pot life 4 h (+23 °C)
Mixing ratio 4:1 by volume (comp. A : comp. B)
Gloss Semi-matt
Drying time – dust free after 1 h
Drying time – touch dry after 3 h
Drying time – fully cured after 7 d
Thinner TEKNOSOLV 9506
Clean up TEKNOSOLV 9506 or TEKNOSOLV 9530
Approvals & certificates SSG 1021-GA