PAINTING SYSTEM
A63.6 TEKNOSPRO KATTO
1. Without jointing
Pre-treatment
Remove loose material, dirt and dust from the surface.
Application
Prime 1 x with TEKNOSPRO POHJA Primer. Topcoat 1 x with TEKNOSPRO KATTO Ceiling paint.
2. With jointing
Pretreatment
Remove loose material, dirt and dust from the surface.
Painting
Fill the screw holes and conseal the joints using a joint tape and SILORA J Filler for joints. Apply a second layer of SILORA LF filler on screw holes and joint tape. Prime 1 x with TEKNOSPRO POHJA primer. Topcoat 1 x TEKNOSPRO KATTO.
PRODUCTS
TEKNOSPRO KATTO
A ceiling paint with especially matt finish, for dry spaces indoors. Pure white finish without sheen.
TEKNOSPRO POHJA
An adhesion primer for wash and wear resistant top coats. Can be used as primer for dry interior spaces and as a top coat on ceilings and air conditioning pipes in dry spaces indoors.
SILORA LF
Ready-to-use, water-borne light all-purpose filler. Used for partial filling, filling of joints and overall skimming of walls and ceilings in dry interior areas.
More specific product information in technical data sheet. Painting system search recommends products based on the information you provide and does not take into account any specific needs of the site, e.g. the quality of the material to be painted or the properties of the previous paint. The main responsibility lies with the designer.
In case of doubt, please contact your local Teknos team.