TEKNOSPRO POHJA

Primer

  • Water-borne

Water-borne, acrylate-based adhesion primer for wash and wear resistant top coats. Finish: full-matt.

Used as primer for dry spaces indoors, e.g. on walls and ceilings in apartments, offices, storerooms and factories. It can also be used as a top coat on ceilings and air conditioning pipes in dry spaces indoors. TEKNOSPRO POHJA can be applied to concrete, plaster, stopper, brick, wood or building boards.

Technical data sheet

Product colour chart

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash. Spray filler ceilings, which are not waterproof, are recommended to be primed with solvent borne primer e.g. FUTURA 3 Adhesion primer. For smoothing of irregularities in the surface choose a suitable filler from the TEKNOSPRO series. The dried filler is sanded down and the dust removed.

Application

Steel surfaces are primed with FERREX AQUA Anticorrosive paint. Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray. Suitable nozzle for airless spray is 0.017 - 0.021".

Application conditions

The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.

Storage

Must not freeze.
Solids abt. 34 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l.
Gloss Full-matt
Tinting system Teknomix
Density abt. 1.4 g/ml
Drying time – dust free after ½ hour
Thinner Water
Clean up Wash the equipment immediately after use with water.
Washability and wear resistance Wet scrub resistance, class 2 according to EN 13300 (ISO 11998).
Packages 2,7 L, 9 L, 18 L
Safety markings See Safety Data Sheet.
Approvals & certificates M1 classification