Light filler

  • Water-borne
  • Filler

Ready-to-use, water-borne light all-purpose filler.

Used for partial filling, filling of joints and overall skimming of walls and ceilings in dry interior areas. The substrate can be gypsum, fibre board, concrete, lightweight concrete, plaster etc. Also suitable for filling of board joints.

SILORA LF has good adhesion and filling capabilities.

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Brittle surfaces and untreated wooden surfaces must be primed before the filler is applied.


Apply the filler by trowel. The number of layers is dependent on the surface roughness. The dried filler can be painted or wall-papered. Before wall-papering the filler surfaces must be primed with adhesive. The use of protective mask for eyes and face is recommended when grinding the filler.

Application conditions

The surface to be treated must be dry. The temperature of the air, the surface and the filler shall be above +5 °C and the relative humidity of the air below 80 % during the time of application and drying.


To be stored in a cool place. Must not freeze. Storage stability is 1 year in unopened package.
Solids abt. 58 % by volume
Volatile organic compound (VOC) The product is not included in the EU VOC directive.
Layer thickness 0 - 4 mm
Density abt. 1.2 g/ml
Particle size 0.2
Clean up Water
Colours Light grey
Packages 0,4 l, 3 l, 10 l.
Safety markings See safety data sheet. CHEMICAL PROPERTIES AND SAFETY The product is not classified as hazardous according to Regulation (EC) 1272/2008. Recommended safety precautions when using the product: Avoid unnecessary skin contact. Use work clothes to protect against paint splashes. Use eye protection to protect againts paint splashes. During spray application avoid breathing spray mist. Use respirator, filter type A P. More information and Safety data sheet: Product's product page
Approvals & certificates CE marking,M1 classification,Nordic Ecolabel