TEKNOSPRO KATTO

Ceiling paint

  • Water-borne

Water-borne acrylate dispersion paint with especially matt finish, for dry spaces indoors. Without side sheen.

New or previously painted ceilings in spaces where especially high demands are placed on the appearance. Used on concrete, plaster, stopper, brick and construction boards.

Technical data sheet

Product colour chart

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash. Spray filler ceilings, which are not waterproof, are recommended to be primed with solvent borne primer e.g. FUTURA 3 Adhesion primer. For smoothing of irregularities in the surface choose a suitable filler from the TEKNOSPRO series. The dried filler is sanded down and the dust removed.

Application

Prime concrete, plaster, stopper, brick and building board surfaces with TEKNOSPRO POHJA Primer. Steel surfaces are primed with FERREX AQUA Anticorrosive paint. Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray. Suitable nozzle for airless spray is 0.017 - 0.021".

Application conditions

The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.

Maintenance

The final forming of the paint film takes abt. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the painted surface must be treated with care. Cleaning by moist wiping or with detergents damages the painted surface. Dry cleaning methods, such as careful wiping, brushing, vacuum cleaning etc., must be used for dirty surface.

Storage

Must not freeze.
Solids abt. 36 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l.
Gloss Full-matt
Tinting system Teknomix
Density abt. 1.5 g/ml
Drying time – dust free after ½ hour
Thinner Water
Clean up Wash the equipment immediately after use with water.
Washability and wear resistance The painted surface resists slight wear. Wet scrub resistance, class 2 according to EN 13300 (ISO 11998).
Packages White: 2,7 L, 9 L, 18 L
Safety markings See Safety Data Sheet.
Approvals & certificates M1 classification