TEKNOTHERM AQUA 4757

Polyester top coat

  • 1-component
  • Top coat
  • Water-borne

Waterborne stoving enamel based on polyester resin for dipping applications.

Topcoat for steel and light alloy metal.

Good adhesion to steel, aluminium and zinc surfaces. Provides a good scratch and impact resistance combined with a good flexibility. Resistant to water, oil, weak acids and bases. Good weather resistance.

Surface preparation

Remove from the surface any contaminants that might be detrimental to surface preparation and coating. Remove also water-soluble salts by using appropriate methods. The surface should be pretreated as follows: Oxilane ®, ironphosphate or zincphospate.
Solids abt. 30 % by volume
Volatile organic compound (VOC) abt. 110 g/l
Volatile organic compound (VOC) Depending upon the colorshade
Gloss Semigloss
Recommended film thickness The recommended maximal film thickness is 40 µm dry film.
Drying time – forced drying after 15 min in 150°C oven
Curing time 15 (metal temperature)
Thinner Water
Clean up Water