TEKNOSAFE FLAME GUARD 2457-10

Intumescent primer and paint

  • Paint
  • Primer
  • Water-borne

TEKNOSAFE FLAME GUARD 2457-10 is a water-borne intumescent primer and paint for interior solid wood panelling and cladding, and wood-based panels. Substrate: Solid wood or wood-based panels with thickness > 8 mm and density ≥ 338 kg/m³ when taken in conjunction with the relevant fire classification report.

Used as an industrial primer or paint to improve “reaction to fire” (EN 13501-1) of interior wooden surfaces. Before using the product, Teknos should be contacted to check the suitability of the product for the object in question.

Used as an industrial primer or paint as part of a system called Teknos FR Panel with TEKNOSAFE FLAME PROTECT 2458-00 to improve “reaction to fire” (EN 13501-1) of interior wooden surfaces. Before using the product, Teknos should be contacted to check the suitability of the product for the object in question. Fire-retardant performance has been classified according to B-s1, d0 EN 13501-1 (SBI test). Durability classes of reaction to fire performance, of fire-retardant wood-based product in end use applications according to EN 16755 - DRF class INT1 and INT2.

Surface preparation

The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 10 % and should not exceed 12 %.

Application conditions

The temperature of the air, the surface and the paint shall be above +10°C and the relative humidity of the air below 80% during the time of application and drying. The best result is achieved when the temperature of the air is between +23°C and +38°C, the relative humidity of the air is 50–70% and the ventilation good. Stir the paint thoroughly before use, preferably using mechanical stirring. For all coated solid wood or wood-based panels, a non-marking protective layer of minimum 1.5 mm thickness (e.g., polyethylene film) is recommended to be used between coated surfaces.

Storage

Must not freeze. The best storage temperature is +10°C - +25°C.

Apply industrially.
Volatile organic compound (VOC) See safety data sheet.
Gloss Matt
Tinting system Teknocolor
Theoretical spreading rate The classification is made with ≥ 250 g/m² TEKNOSAFE FLAME GUARD 2457-10 with or without ≤ 45 g/m² TEKNOCOAT AQUA 1864-62 or ≤12 g/m² UVILUX 651-14120.
Drying time – touch dry 20–30 min.
Drying time - overcoatable After at least 4 h. TEKNOSAFE FLAME GUARD 2457-10 must be through-dry before application of the topcoat.
Thinner Water.
Clean up Water.
Colours Base 1 or Base 3 (all opaque colours). All tinting recipes are developed by Teknos Shade service.
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet.