TEKNOROAD 250
Road marking paint
- 1-component
- Solvent-borne
- 1-component
- Solvent-borne
TEKNOROAD 250 is a fast-drying, matt alkyd paint that is resistant to weather and light.
Used on asphalt and on oil gravel for marking of roads and related carriageways, parking places, air fields and other areas with traffic. TEKNOROAD 250 dries extremely fast. When the temperature is above +20°C, traffic can be allowed on the painted surfaces after 5 minutes without causing damage to the paint. The drying is slower at lower temperatures but even then it is fast enough for the paint to be used when the temperature is e.g. +5 - +10°C. TEKNOROAD 250 meets the quality requirements for road marking paints prescribed by the Finnish Transport Infrastructure Agency.
Technical data sheet
Safety data sheet
Other product specific documents
Surface preparation
The surface to be treated must be dry and clean.
Loose matter that may weaken adhesion, such as sand, gravel, moss and other kind of growth, poorly adherent previous markings, oil and grease must always be carefully removed before applying the marking material.
Application
Stir thoroughly before use.
NOTE! Make sure, that mixer's motors are Ex-protected, because the paint is highly flammable.
To achieve retro-reflectance, it is recommended that glass beads are strewn on the fresh paint coat.
Application conditions
The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%.
Storage
The storage stability is shown on the label. Store in a cool place and in tightly closed containers.
| Volatile organic compound (VOC) | white: approx. 380 g/l yellow: approx. 400 g/l black: approx. 350 g/l |
|---|---|
| Gloss | Matt |
| Theoretical spreading rate | The theoretical spreading rate is 3 - 4 m²/l when using the recommended film thicknesses. |
| Thinner | TEKNOSOLV 4039 |
| Clean up | TEKNOSOLV 4039 |
| Colours | White, yellow and several special colours. White and yellow come up to the requirements for brightness and colour prescribed by the Finnish Transport Infrastructure Agency. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | Finnish Transport Infrastructure Agency |