TEKNOCEILING 02

Ceiling paint

Water-borne acrylate dispersion paint. Finish: full-matt.

The paint is used as a top coat on surfaces in dry interior premises, e.g. on ceilings in apartments and office rooms, walls and ceilings in storerooms and factories. Can be applied to concrete, plaster, filler, brick, wood or various building boards.

Technical data sheet

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash. Spray filler ceilings, which are not waterproof, are recommended to be primed with solvent borne primer e.g. FUTURA 3 Adhesion primer. For smoothing of irregularities in the surface choose a suitable filler from the TEKNOSPRO series. The dried filler is sanded down and the dust removed. Steel surfaces are primed with FERREX AQUA Anticorrosive paint.

Application

Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray.

Application conditions

The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.

Maintenance

The final forming of the paint film takes abt. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the painted surface must be treated with care. Cleaning by moist wiping or with detergents damages the painted surface. Dry cleaning methods, such as careful wiping, brushing, vacuum cleaning etc., must be used for dirty surface.

Storage

Must not freeze.
Solids abt. 38 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l.
Gloss Full-matt
Tinting system Teknomix
Density abt. 1.5 g/ml
Practical spreading rate Applied once onto a smooth surface: 5 - 8 m²/l.
Drying time – dust free after ½ h
Drying time - overcoatable after 1 h
Thinner Water
Clean up Wash the equipment immediately after use with water.
Packages White: 2,7 L, 9 L.
Safety markings See Safety Data Sheet.
Approvals & certificates M1 classification,Nordic Ecolabel