Teknos coating solutions for nuclear power plants
The paints used in nuclear power plants are high-class, special products. Their quality is verified through heavy testing programmes.
Teknos’ nuclear power plant coating systems for metal and mineral surfaces meet the latest international standards and requirements, for instance, STUK-YTO-TR 210 (Radiation and Nuclear Safety Authoroty) and TBY (Technical Re-gulations for Surface Treatment).
Teknos' Paint Systems for Nuclear Power Plants
Nuclear Power Plants - Paint Systems for Mineral Surfaces |
||
| TEKNOPOX AQUA V FILL A | filler < 2 mm | Walls and ceilings, controlled areas |
| TEKNOPOX AQUA V TIX A | 80 μm | |
| TEKNOPOX AQUA V A | 80 μm | |
| TEKNOFLOOR AQUA 110F A | 3 x 60 μm | Floors, controlled areas |
| TEKNOFLOOR PRIMER 5730 A | priming | Floors outside containment, controlled areas |
| TEKNOFLOOR 5600 A | 2–4 mm | |
| TEKNOFLOOR PRIMER 5740 A | priming | Floors inside containment, controlled areas (DBA approved) |
| TEKNOFLOOR 5610 A | 2–4 mm | |
Nuclear Power Plants - Paint Systems for Metal Surfaces |
||
| INERTA PRIMER 5 A | 80 μm | Steel containment inside, controlled areas Pipes outside (no condensation) |
| INERTA 51 A | 80 μm | |
| INERTA 50 A | 40 μm | |
| TEKNOPLAST HS 150 A | 3 x 100 μm | Pipes outside (under continuous condensation), controlled areas |
| INERTA 160 A | 500 μm | Pipes and tanks immersed in operation medium, controlled areas |
| INERTA 160 | 2 x 500 μm | Sea water pipes, non-controlled areas |
| INERTA 165 A | 2 x 250 μm | Pipes and tanks immersed in operation medium, controlled areas |
| TEKNOZINC 90 SE A | 50 μm | Embedded parts in concrete, controlled areas, anchor plates, steel frames |
| INERTA 51 MIOX A | 30 μm | |
| TEKNOPLAST HS 150 A | 120 μm | |
All photos by TVO
NUCLEAR POWER PLANT PAINT SYSTEMS
Teknos' high-class paint systems for metal and mineral surfaces in nuclear power plants
Are you interested in industrial painting? Subscribe to our newsletter!