1. Teknos Americas
  2. Consumer
  3. Products
  4. Product search
  5. BIORA 7

BIORA 7

Matt interior paint

»
  • Water-borne

Water-borne acrylate dispersion paint intended for use on interior walls. It is easy to apply and produces a matt, even film.

BIORA 7 can be applied onto concrete, plaster, filler, brick and building board surfaces.

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed.

Application

Stir thoroughly before use. Apply once or twice.

Application conditions

The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.

Maintenance

The final forming of the film takes approx. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the surface must be treated with care. The surface can be cleaned by light wiping. Use a damp cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion.

Storage

Must not freeze.

Suitable airless nozzle size 0.017 - 0.021".
Solids abt. 38 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l.
Gloss Matt
Tinting system Teknomix
Density abt. 1.3 g/ml
Practical spreading rate Previously painted surface: 10 - 12 m²/l. Filler and wood fibre board: 7 - 10 m²/l. Concrete and plastered surface: 4 - 8 m²/l
Drying time – dust free ½ h
Thinner Water.
Clean up Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use.
Colours Base paints 1 (white) and 3, which can be tinted to obtain the shades in Interior Colour Card.
Packages Base paints 1 and 3: 0.9 l, 2.7 l, 9 l.
Safety markings See safety data sheet. CHEMICAL PROPERTIES AND SAFETY The product is not classified as hazardous according to Regulation (EC) 1272/2008. Recommended safety precautions when using the product: Avoid unnecessary skin contact. Use work clothes to protect against paint splashes. Use eye protection to protect againts paint splashes. During spray application avoid breathing spray mist. Use respirator, filter type A P. More information and Safety data sheet: Product's product page www.teknos.com
Approvals & certificates Allergy label (Finland),M1 classification,Nordic Ecolabel,Finnish Key Flag
Gloss value 6- 8