Matt interior paint
Water-borne acrylate dispersion paint intended for use on interior walls. It is easy to apply and produces a matt, even film.
BIORA 7 can be applied onto concrete, plaster, filler, brick and building board surfaces.
Technical data sheet
Safety data sheet
Other product specific documents
Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash. Spray filler ceilings, which are not waterproof, are recommended to be primed with solvent borne primer e.g. FUTURA 3 Adhesion primer. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed.
Paint concrete, plaster, stopper, brick, chipboard, gypsum board and fibre board surfaces straight on with BIORA 7 interior paint or prime with BIORA PRIMER primer and ceiling paint. Steel surfaces are primed with FERREX AQUA Anticorrosive paint. Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray. Suitable nozzle for airless spray is 0.017 - 0.021".
The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5 °C and the relative air humidity below 80 %. Good ventilation during the application and drying period quickens the drying process.
The final forming of the paint film takes abt. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the painted surface must be treated with care. The painted surface can be cleaned by light wiping. Use a damp cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion.
Must not freeze.
|Solids||abt. 38 % by volume|
|Volatile organic compound (VOC)||EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l.|
|Density||abt. 1.3 g/ml|
|Drying time – dust free||½ h|
|Clean up||Wash the equipment immediately after use with detergent and warm water.|
|Washability and wear resistance||Wear resistance of the painted surface is moderate. Wet scrub resistance, class 2 according to EN 13300 (ISO 11998). Lasts over 5 000 brushings, SFS 3755.|
|Packages||Base paints 1 and 3: 0,9 L, 2,7 L, 9 L|
|Safety markings||See safety data sheet. CHEMICAL PROPERTIES AND SAFETY The product is not classified as hazardous according to Regulation (EC) 1272/2008. Recommended safety precautions when using the product: Avoid unnecessary skin contact. Use work clothes to protect against paint splashes. Use eye protection to protect againts paint splashes. During spray application avoid breathing spray mist. Use respirator, filter type A P. More information and Safety data sheet: Product's product page www.teknos.com|
|Approvals & certificates||Allergy label (Finland),M1 classification,Nordic Ecolabel,Finnish Key Flag|
|Gloss value||6- 8|