WOODEX AQUA WOOD OIL

- Water-borne
Water-borne wood oil for outdoor use.
Natural oil for outdoor use for protection of garden deck floors, jetties and wooden garden furniture. Other suitable objects are fences, trellises, doors and stairs. For untreated, heat-treated and press-impregnated wood. Applied on clean, dry wooden surface by brush, sponge or by dipping. Protects wooden surfaces from moisture, soiling and when tinted from UV radiation of the sun. Deminishes cracking of the wooden surface. Not suitable for greenhouses, hotbeds and shelters for livestock.
Technical data sheet
Safety data sheet
- WOODEX AQUA WOOD OIL_BROWN_2022-12-13_EU_en
- WOODEX AQUA WOOD OIL_BROWN_2022-12-13_GB_en
- WOODEX AQUA WOOD OIL_BROWN_2022-12-13_IE_en
- WOODEX AQUA WOOD OIL_BROWN_2022-12-13_MT_en
- WOODEX AQUA WOOD OIL_BROWN_2022-12-13_NI_en
- WOODEX AQUA WOOD OIL_CLEAR_2023-09-18_EU_en
- WOODEX AQUA WOOD OIL_CLEAR_2023-09-18_GB_en
- WOODEX AQUA WOOD OIL_CLEAR_2023-09-18_IE_en
- WOODEX AQUA WOOD OIL_CLEAR_2023-09-18_MT_en
- WOODEX AQUA WOOD OIL_CLEAR_2023-09-18_NI_en
- WOODEX AQUA WOOD OIL_GREY_2022-12-13_EU_en
- WOODEX AQUA WOOD OIL_GREY_2022-12-13_GB_en
- WOODEX AQUA WOOD OIL_GREY_2022-12-13_IE_en
- WOODEX AQUA WOOD OIL_GREY_2022-12-13_MT_en
- WOODEX AQUA WOOD OIL_GREY_2022-12-13_NI_en
Other product specific documents
Surface preparation
Clean the surface to be treated. Use RENSA TERRACE deck cleaner on surfaces to be treated, when needed. Rinse the surfaces thoroughly with water and allow to dry. Remove from the surface all loose and poorly adherent old matter and fluffy top layers of the wood. We recommend that untreated wood is primed with wood preservative from WOODEX-series. Remove old paint or varnish layers before the treatment.
Application
Stir well before application. Tinted product must also be stirred during the application, if needed. Applied on the surface 1 - 2 times by brush, sponge or by dipping. The wood oil can be diluted by 10 - 30% to improve the absorption. Depending on the quality of the wood, the treatment is renewed. The possible excess oil is wiped off.
Application conditions
The surface to be treated must be dry. The relative moisture of the wood must be below 20% of the weight of the wood. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5 °C and the relative air humidity below 80%.
Painting in strong sunlight or in moist weather is to be avoided.
Storage
Must not freeze.
Solids | abt. 10 % by volume |
---|---|
Volatile organic compound (VOC) | The product is not included in the EU VOC directive. |
Tinting system | Teknomix |
Density | abt. 1 g/ml |
Drying time – dust free | 4 h |
Drying time – dry to use | 16 h |
Thinner | Water. |
Clean up | Wash the equipment immediately after use with detergent and warm water. |
Colours | Clear, brown, grey and translucent colours. |
Weather resistance | For surfaces that are continuously exposed to weathering a renewed treatment is done yearly, or whenever required. |
Packages | Clear, brown and grey: 0,9 l, 2,7 l, 9 l. |
Safety markings | See Safety Data Sheet. NOTE! Because of the danger of self-ignition, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended. |
Approvals & certificates | Finnish Key Flag |