PAINTING SYSTEM
A20.1 TEKNOFLOOR 500F
Pretreatment
Remove laitance by shot-blasting or diamond-grinding. If neither is possible use RENSA ETCHING Etching liquid.
Application
Fill the gaps with TEKNOPOX FILL. Prime surfaces with 30 % diluted TEKNOFLOOR PRIMER 310F Epoxy varnish . TOPCOAT 6-24 hours after priming with TEKNOFLOOR 500F epoxy coating.
PRODUCTS
TEKNOPOX FILL
Intended to be used for stopping up pitted steel and porous concrete surfaces subjected to heavy abrasion.
More specific product information in technical data sheet. Painting system search recommends products based on the information you provide and does not take into account any specific needs of the site, e.g. the quality of the material to be painted or the properties of the previous paint. The main responsibility lies with the designer.
In case of doubt, please contact your local Teknos team.