Epoxy stopper

TEKNOPOX FILL is a two-pack, solvent-free stopper based on epoxy resin.

Intended to be used for stopping up pitted steel and porous concrete surfaces subjected to heavy abrasion.

TEKNOPOX FILL is easy to apply. It can also be used on vertical surfaces, because it does not run or sag. The product has CE approval for protection of concrete structures.

Solids abt. 100 % by volume
Total mass of solids abt. 1000 g/l
Volatile organic compound (VOC) abt. 0 g/l
Pot life 20 min (+23 °C)
Mixing ratio 1:1 by volume (comp. A : comp. B)
Hardener Comp. B: TEKNOPOX FILL HARDENER (black)
Drying time – dust free after 6 h
Drying time – fit for light traffic after 16 h
Drying time – fully cured after 7 days
Clean up TEKNOSOLV 9506
Approvals & certificates CE marking