UVILUX 1745-09
UV Enamel
- Enamel
UV-curing enamel.
Surface treatment of wood based boards such as chipboard, masonite and MDF.
The cured enamel provides a smooth and hard surface with excellent chemical and mechanical resistance.
Technical data sheet
Safety data sheet
| Volatile organic compound (VOC) | See Safety Data Sheet. |
|---|---|
| Recommended film thickness | 25-30 g/m² by opti-roller on well calibrated substrates. |
| Drying time – fully cured | Curing should not be carried out at belt speeds exceeding 5 m/lamp (80 W/cm). |
| Thinner | The enamel is ready for use. |
| Clean up | If necessary, the roller may be cleaned with TEKNOSOLV 1129. |