UVILUX 1745-02
UV Enamel
- Enamel
UV-curing enamel.
Surface treatment of wood based boards such as chipboard, masonite and MDF.
The cured enamel provides a smooth and hard surface with excellent chemical and mechanical resistance.
Technical data sheet
Safety data sheet
- UVILUX 1446-11_TS 21067 BASE 3_2020-10-22_IE_en
- UVILUX 1446-11_TS 21067 BASE 3_2020-10-22_UK_en
- UVILUX 1745-02_HY 0100 WHITE_2020-01-27_IE_en
- UVILUX 1745-02_HY 0100 WHITE_2020-01-27_UK_en
- UVILUX 1745-02_NCS S 1000-N_2020-01-27_IE_en
- UVILUX 1745-02_NCS S 1000-N_2020-01-27_UK_en
- UVILUX 1745-02_TS 14643 OFF WHITE_2020-01-27_IE_en
- UVILUX 1745-02_TS 14643 OFF WHITE_2020-01-27_UK_en
- UVILUX 1745-02_TS 20319 WHITE_2020-01-27_IE_en
- UVILUX 1745-02_TS 20319 WHITE_2020-01-27_UK_en
- UVILUX 1745-02_TS 20736 TURQUOISE GREEN 13-5309-1_2020-01-27_IE_en
- UVILUX 1745-02_TS 20736 TURQUOISE GREEN 13-5309-1_2020-01-27_UK_en
- UVILUX 1745-02_TS 20921 ANTHRACITE GREY_2020-12-15_IE_en
- UVILUX 1745-02_TS 20921 ANTHRACITE GREY_2020-12-15_UK_en
- UVILUX 1745-02_TS 21081 TERRA COTTA_2020-11-11_IE_en
- UVILUX 1745-02_TS 21081 TERRA COTTA_2020-11-11_UK_en
- UVILUX 1745-02_TS 21082 GRAFIT_2020-11-20_IE_en
- UVILUX 1745-02_TS 21082 GRAFIT_2020-11-20_UK_en
- UVILUX 1745-02_TS 21094 SNEHVID_2020-11-20_IE_en
- UVILUX 1745-02_TS 21094 SNEHVID_2020-11-20_UK_en
- UVILUX 1745-02_TS 21105 DUSTIE BLUE_2020-12-01_IE_en
- UVILUX 1745-02_TS 21105 DUSTIE BLUE_2020-12-01_UK_en
- UVILUX 1745-02_TS 21106 NCS S 0502-Y_2020-12-03_IE_en
- UVILUX 1745-02_TS 21106 NCS S 0502-Y_2020-12-03_UK_en
| Volatile organic compound (VOC) | See Safety Data Sheet. |
|---|---|
| Recommended film thickness | 20-25 g/m² by opti-roller on well calibrated substrates. |
| Drying time – fully cured | Curing should not be carried out at belt speeds exceeding 5 m/lamp (80 W/cm). |
| Thinner | The enamel is ready for use. |
| Clean up | If necessary, the roller may be cleaned with TEKNOSOLV 1129. |