TEMPO

Parquet primer

Water-borne primer, which accentuates the natural colour of the wood.

TEMPO is suitable for priming parquet and wooden floors using all application methods. To be used in combination with Teknos parquet lacquers.

Technical data sheet

Safety data sheet

Application

Sand the wooden surface properly, finish with sandpaper n:o 100 or finer. Fill the gaps with GAP Parquet putty during the intersanding process. Apply TEMPO on the wooden surface after the final sanding with a stainless steel trowel, lacquer roller, felt trowel or a lacquer brush. Ensure that the lacquer has dried and intersand with, for example, abrasive net or sandpaper grit 120. If working with a steel trowel, apply two TEMPO coats with a steel trowel after intersanding and allow to dry thoroughly. After priming, finish with Teknos water-based parquet lacquer. Water-based primers may cause slight swelling of the wooden surface. If an absolutely smooth surface is desired, sand the surface lightly after the first lacquer coat. Ensure that the primer has fully dried before applying the top lacquer.

Application conditions

The surface to be varnished has to be dry. The moisture content of the wood should be 7 ±2 % by weight. The temperature of the air, the surface and the lacquer shall be above +18 - 24°C and the relative humidity of the air 40 - 60% during the time of application and drying.

Storage

Storage time: in unopened containers, above +1°C, for 1 year. MUST NOT FREEZE.
Solids abt. 32 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/i): 140 g/l. The product's VOC: max. 140 g/l.
Density abt. 1 g/ml
Thinner Water
Clean up Wash the equipment immediately after use with water and RENSA BRUSH brush cleaner.
Packages Clear: 5 L
Safety markings See Safety Data Sheet.
Approvals & certificates M1 classification,Finnish Key Flag