Full-matt, water-borne acrylate paint

  • Water-borne

Full-matt, water-borne acrylate paint for interior painting.

The paint is suitable for new and previously painted surfaces of wood, concrete, plaster, stopper, brick and building boards whenever a black surface with full-matt finish is desired. The paint is especially well suited for painting the structures behind lowered lattice ceilings.

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed. Steel surfaces are primed with FERREX AQUA Anticorrosive paint.


Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray.

Application conditions

The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5 °C and the relative air humidity below 80 %. Good ventilation during the application and drying period quickens the drying process.


Must not freeze.
Solids abt. 31 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l.
Gloss Full-matt
Density abt. 1.5 g/ml
Drying time – dust free after ½ hour
Drying time - overcoatable after 2 hours
Thinner Water.
Clean up Wash the equipment immediately after use with water.
Colours Black
Washability and wear resistance The painted surface resists slight wear. Wet scrub resistance, class 3 according to EN 13300 (ISO 11998).
Packages 9 L, 18 L
Safety markings See Safety Data Sheet.
Approvals & certificates M1 classification,Finnish Key Flag