Carpentry filler

  • Water-borne
  • Filler

Ready-to-use, water-borne alkyd/acrylic filler.

Used on dry interior surfaces e.g. furniture, window frames and doors for part or full filling. Can be used on steel surfaces and also wall and ceiling surfaces when very smooth surface is required.

TEKNOSPRO BREPLASTA A has good adhesion and filling capability. It is fast drying, nearly odourless and withstands well moisture. The filler produces a good substrate to apply furniture- and high gloss top-coat paints.

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Brittle substrates and untreated wooden and metal surfaces must be primed before the filler is applied.


Apply the filler with a trowel. The number of layers is dependent on the surface roughness. The dried filler can be painted or wall-papered. Before wall-papering the filler surfaces must be primed with adhesive. The use of protective mask for eyes and face is recommended when sanding the filler.

Application conditions

The surface to be treated must be dry. The temperature of the air, the surface and the filler shall be above +5 °C and the relative humidity of the air below 80 % during the time of application and drying.


To be stored in a cool place. Must not freeze. Storage stability is 1 year in unopened package.
Solids abt. 59 % by volume
Volatile organic compound (VOC) The product is not included in the EU VOC directive.
Layer thickness 0 - 2 mm
Density abt. 1.8 g/ml
Particle size 0.03
Clean up Water
Packages 0,2 L, 0,4 L, 3 L
Safety markings See Safety Data Sheet.
Approvals & certificates CE marking