TEKNOL 3881-00
Alkyd-acrylic paint
- Water-borne
- Primer
- Water-borne
- Primer
TEKNOL 3881-00 is a water-borne primer and intermediate paint based on alkyd and acrylic.
Use: Industrial primer and intermediate paint for planed and fine sawn wooden facade boards and prefabricated units for wooden houses. The paint dries quickly and has good covering and adhesion properties. TEKNOL 3881-00 protects the timber surface until the topcoat is applied, either on-site or in a factory coating facility. The final topcoat should be applied as soon as possible, and no later than the first summer season following priming. Can be top coated with both dispersion and oil paints. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.
Technical data sheet
Surface preparation
The surface must be clean and dry. The moisture content of the wood is to be below 20%.
Application
Stir thoroughly before use.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%.
Storage
Must not freeze. The storage stability is shown on the label. Store in a tightly closed container. The best storage temperature is +10°C - +25°C.
| Volatile organic compound (VOC) | abt. 23 g/l |
|---|---|
| Gloss | Matt |
| Tinting system | Teknocolor;Teknomix |
| Drying time – touch dry | 30 min |
| Drying time - overcoatable | 4 h |
| Thinner | Water. |
| Clean up | Water. |
| Safety markings | See safety data sheet. NOTE! Because of the danger of spontaneous combustion, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended. |
| Gloss value | 00005 |