MOTIVO COLORATO 2070-30
Water-borne 1C top coat for interior use
- 1-component
- Water-borne
- Topcoat
MOTIVO COLORATO 2070-30 is a fast-drying, water-borne 1C top coat with very good flow properties. The product is characterised by its high elasticity and good block resistance.
Technical data sheet
Safety data sheet
- MOTIVO COLORATO 2070-30_2019-06-05_MY_en
- MOTIVO COLORATO 2070-30_2021-06-30_FI_en
- MOTIVO COLORATO 2070-30_2022-05-31_GB_en
- MOTIVO COLORATO 2070-30_2024-01-16_EU_en
- MOTIVO COLORATO 2070-30_2024-01-16_IE_en
- MOTIVO COLORATO 2070-30_2024-01-16_MT_en
- MOTIVO COLORATO 2070-30_2024-01-16_NI_en
- MOTIVO COLORATO 2070-30_2025-05-06_EU_en
- MOTIVO COLORATO 2070-30_2025-05-06_IE_en
- MOTIVO COLORATO 2070-30_2025-05-06_MT_en
- MOTIVO COLORATO 2070-30_2025-05-06_NI_en
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
| Weight solids | abt. 34 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 74 g/l |
| Tinting system | Largo;Teknocolor |
| Theoretical spreading rate | 120 g/m²; 8.3 m²/kg |
| Density | abt. 1.19 g/ml |
| Drying time – dust free | after 60 minutes |
| Drying time – touch dry | after 45 minutes |
| Drying time – through-dry | after 10 hours |
| Drying time - overcoatable | after 2 hours |
| Clean up | Wash the equipment immediately after use. Water, ACETON 8000-98. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | EN 71-3,Swiss environmental label UE II, class B |
| Gloss value | 30 |