1. Teknos
  2. Decorative paints
  3. Products
  4. Product search
  5. FUTURA AQUA 90

FUTURA AQUA 90

Full gloss top coat for wood and metal

»
  • Wear resistant
  • Water-borne

Durable water-borne urethane alkyd based top coat for detached and fixed furniture indoors and outdoors. Ideal application properties. Excellent scratch and wear resistance. The painted surface is easy to keep clean. Finish: full gloss. The product has been classified to Group M1 in Emission Classification of building materials.

Indoors FUTURA AQUA 90 is suitable for primed and previously with alkyd paint painted wood, metal and building board surfaces: doors, window casements, cabinets, mouldings, panels, panel ceilings, air ducts, staircase railings, radiators and piping systems. Outdoors FUTURA AQUA 90 is suitable for painting primed window casements, doors, garden furniture etc. Indoors FUTURA AQUA 90 is also suitable for plaster and filler surfaces primed with FUTURA AQUA PRIMER, for example window sills and casings, and wall surfaces in special objects, e.g. staircases.

Technical data sheet

Safety data sheet

Product colour chart

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Smooth any irregularities in the surface with SILORA A carpentry filler.

Application

Wood, wood fibre board and building board surfaces as well as galvanized metal surfaces are primed with FUTURA AQUA PRIMER adhesion primer. Rusting steel surfaces as well as aluminium and copper surfaces are primed with FERREX AQUA anticorrosive paint. Before use stir the paint thoroughly. The paint is thinned with water 5 - 15 % by volume when needed. Apply the paint once or twice with a varnish brush, mohair roller, painting pad or spray. When painting a smooth surface, e.g. flush door, the marks left by a roller may be smoothed down with painting pad or with varnish brush. Airless spray nozzle 0.011 - 0.013''.

Application conditions

The surface to be painted must be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +10°C and the relative air humidity below 80%. Drying is faster in low air humidity and/or above + 21°C. Application will be easier if air is humidified and/or temperature is lowered in the working space. Ventilation after the painting will quicken the drying.

Storage

Must not freeze.
Solids abt. 40 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/d): 130 g/l. The product's VOC: max. 130 g/l.
Gloss Full gloss
Tinting system Teknomix
Density abt. 1.2 g/ml
Practical spreading rate 8 - 10 m²/l
Drying time – dust free after 1 hour
Drying time – through-dry after 2 - 3 days
Drying time - overcoatable after 6 hours
Thinner Water.
Clean up Wash the equipment immediately after use with warm water and RENSA BRUSH brush cleaner.
Packages Base paints 1 and 3: 0,45 L, 0,9 L, 2,7 L
Safety markings See safety data sheet.