BIORA CLEAN

Matt protective interior wall paint

Antimicrobial / Disinfectant
Water-borne

Antimicrobial / Disinfectant
Water-borne

Matt water-borne acrylate dispersion paint which contains BioCote® silver phosphate glass antimicrobial technology to preserve the coating surface and prevent colonisation and degradation caused by microbial growth once applied to the intended substrate.

For indoor use in spaces where wall and ceiling surfaces must be easy to clean and resistant to abrasion. Recommended objects, where special acrylate improves the functionality of the spaces, are hospitals, health centres and other public health premises, nursing homes, kindergartens, schools and other public spaces, as well as e.g. food industry spaces. BIORA CLEAN can be applied to primed concrete, plaster, filler, brick and building board surfaces according to the instructions. BIORA CLEAN is also suitable for repainting old alkyd and dispersion paint coats.

Technical data sheet

BIORA CLEAN_1742-00_TDS_en

Product colour chart

Interior colours

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed.

Application

Stir thoroughly before use. Apply once or twice.

Application conditions

The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.

Maintenance

The final forming of the film takes approx. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the surface must be treated with care. The surface can be cleaned by wiping with a neutral (pH 6 - 8) detergent. For very dirty surfaces can also alkalescent (pH 8 - 10) detergents be used. Detergent and dirt are removed by wiping and/or rinsing the surface with clean water. Use a cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion. Follow the dilution and other instructions of the detergent producer when using detergents.

Storage

Must not freeze.

Suitable airless nozzle size 0.017 - 0.021".

Solids	abt. 37 % by volume
Volatile organic compound (VOC)	EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l.
Gloss	Matt
Tinting system	Teknomix
Density	abt. 1.3 g/ml
Practical spreading rate	6 - 8 m²/l.
Drying time – dust free	1 h
Drying time - overcoatable	3 h
Thinner	Water.
Clean up	Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use.
Colours	Base paints 1 (white) and 3, which can be tinted to obtain the shades in Interior Colour Card.
Packages	Base paints 1 and 3: 0.9 l, 2.7 l, 9 l.
Safety markings	See safety data sheet.
Approvals & certificates	Allergy label (Finland),M1 classification