Primer for flow coating / dipping

  • Water-borne
  • Primer

AQUAPRIMER 2900-02, a translucent water-borne industrial primer for new wood designated for exterior use such as windows and doors.

AQUAPRIMER 2900-02 can be applied by flow coat or dipping. AQUAPRIMER 2900-02 will typically be applied on softwood or hardwood, which for non-durable hardwood and softwood has been pretreated with a Wood Preservative. Exterior durability of coating systems including AQUAPRIMER 2900-02 is typically documented according to EN 927-2.

Surface preparation

The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016. Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.

Application conditions

Stir thoroughly before use. Optimum temperature for products and surroundings: +18°C - +22°C. Optimum relative air humidity: Approx. 50%. Due to evaporation, the solid content of the liquid must be adjusted with water regularly. Wet film range 75-100 µm.


Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.

Saturation spray and brush machine application is also possible.
Weight solids abt. 10 % by weight
Volatile organic compound (VOC) abt. 21 g/l
Tinting system Teknocolor;Teknomix
Theoretical spreading rate 12-13 m²/l
Clean up Water.
Colours Base T (translucent colours).
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet.