Primer for flow coating / dipping

  • Water-borne
  • Primer

AQUAPRIMER 2900-02, a translucent water-borne industrial primer for new wood designated for exterior use such as windows and doors.

AQUAPRIMER 2900-02 can be applied by flow coat or dipping. AQUAPRIMER 2900-02 will typically be applied on softwood or hardwood, which for non-durable hardwood and softwood has been pretreated with a Wood Preservative. Exterior durability of coating systems including AQUAPRIMER 2900-02 is typically documented according to EN 927-2.

Surface preparation

The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016. Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.

Application conditions

Stir thoroughly before use. Optimum temperature for products and surroundings: +18°C - +22°C. Optimum relative air humidity: Approx. 50%. Due to evaporation, the solid content of the liquid must be adjusted with water regularly. Wet film range 75-100 µm.


Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.

Application methods

Saturation spray and brush machine application is also possible.
Volatile organic compound (VOC) See safety data sheet.
Tinting system Teknomix
Theoretical spreading rate 12-13 m²/l
Clean up Water.
Colours Base T (translucent colours).
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet.