RIIHI

NEW WOOD SURFACES: New wood surface should be treated as soon as possible. Remove from the surface all loose matter, dirt, dust and mildew. If needed, use RENSA FACADE facade cleaner. PREVIOUSLY PAINTED OR OLD WOODEN SURFACE: Rotted, mouldy and deteriorated wooden parts are to be changed to new ones. Remove loose and poorly adherent paint coats. Remove the fluffy top layer of the wood. Wash mildewed surfaces with RENSA FACADE facade cleaner. Rinse the surfaces thoroughly with water and allow to dry. It is recommended that the bare wood surfaces are treated with colourless wood preservative from the WOODEX-series. Let the treated surface to dry for 24 hours.

Before use stir the paint thoroughly. Reserve a sufficient amount of paint in the same vessel for each uniform surface. Colour differences will thus be avoided. Apply by brush. One application with undiluted paint is usually enough. If the application is interrupted immerse the equipment into water and after the work is done wash them immediately so that the paint has no time to dry.

The surface to be painted must be dry. The moisture of the wood must be below 20 % of the dry weight of the wood. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5 °C and the relative air humidity below 80 %.

Must not freeze.