TEKNOCOAT AQUA 2550-02
Water-borne 1K acrylic topcoat
- Topcoat
- Topcoat
High-performance, water-borne acrylic-based topcoat developed for industrial use on interior doors, solid wood, MDF, and fibreboards. The product is optimized for modern, fast coating lines where both process efficiency and surface finish are critical.
• Very fast drying • Excellent stacking properties • Good flow properties • Hard and durable surface With this topcoat, you achieve an efficient and reliable solution that combines fast throughput with a professional and long-lasting finish.
Surface preparation
The surface to be treated must be dry, clean, and free from dust. The moisture content of the wood is to be below 20%.
Application
Stir the product homogeneous before use.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 80%.
The best result is achieved when the temperature of the air is +23°C - +38°C, the relative humidity of the air 50 - 70% and the ventilation is good.
During application and drying, the temperature of the ambient air, the surface, and the product should be above +15 °C, and the relative humidity should remain below 80%.
For optimal results, maintain air temperature between +23 °C and +38 °C, relative humidity between 50% and 70%, and ensure good ventilation.
Storage
Protected against frost and not above +30°C. Keep containers tightly closed after use. The storage stability is shown on the label.
| Solids | abt. 32 % by volume |
|---|---|
| Total mass of solids | abt. 510 g/l |
| Volatile organic compound (VOC) | abt. 50 g/l |
| Gloss | Semi-matt |
| Tinting system | Teknomix |
| Theoretical spreading rate | 10 m²/l (wet film 100 µm, dry film 30 µm) |
| Drying time – forced drying | +50°C / 50% RH: - dry to handle: 40 min after cooling - stackable / fit for sanding: 2 h |
| Thinner | Water or TEKNOSOLV 1935. |
| Clean up | Water, TEKNOCLEAN 1949-00. |
| Colours | Base paint 1 with limited tintability. |
| Packages | Available in a range of standard pack sizes. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | M1 classification |
| Gloss value | 22-28 |