AQUAPRIMER 2900-43
Primer for flow coating / dipping
- Water-borne
- Primer
- Water-borne
- Primer
AQUAPRIMER 2900-43, a water-borne industrial primer for new wood designated for exterior use such as windows and doors. AQUAPRIMER 2900-43 provides good run-off properties on problematic wood species such as oak, iroko and framiré.
Before use, the manufacturer or technical service department should be consulted to confirm the product’s suitability for the specific substrate, coating system, and exposure conditions.
Technical data sheet
Safety data sheet
Surface preparation
The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%.
Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016. Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.
Application conditions
Stir thoroughly before use.
Optimum temperature for products and surroundings: +15°C - +30°C. Optimum relative humidity of the air is 50-70%.
Wet film range 75-100 µm.
Due to evaporation, the solid content of the liquid must be adjusted with water regularly.
Storage
Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
| Solids | abt. 9 % by volume |
|---|---|
| Volatile organic compound (VOC) | abt. 2 g/l |
| Tinting system | Teknomix;Teknoshade |
| Theoretical spreading rate | 12-13 m²/l |
| Clean up | Water. |
| Colours | Base T (translucent colours). |
| Packages | 20 l |
| Safety markings | See safety data sheet. |