PAINTING SYSTEM
A63.6 TEKNOSPRO POHJA
1. Without jointing
Pre-treatment
Remove loose material, dirt and dust from the surface.
Application
2x with water-borne TEKNOSPRO POHJA primer
2. With jointing
Pretreatment
Remove loose material, dirt and dust from the surface.
Application
Fill the screw holes and conseal the joints using a joint tape and water-borne filler SILORA J. Apply another layer of SILORA LF on screw holes and joint tape. Paint 2 x with TEKNOSPRO POHJA primer.
PRODUCTS
TEKNOSPRO POHJA
An adhesion primer for wash and wear resistant top coats. Can be used as primer for dry interior spaces and as a top coat on ceilings and air conditioning pipes in dry spaces indoors.
SILORA LF
Ready-to-use, water-borne light all-purpose filler. Used for partial filling, filling of joints and overall skimming of walls and ceilings in dry interior areas.
More specific product information in technical data sheet. Painting system search recommends products based on the information you provide and does not take into account any specific needs of the site, e.g. the quality of the material to be painted or the properties of the previous paint. The main responsibility lies with the designer.
In case of doubt, please contact your local Teknos team.