PAINTING SYSTEM
A63.5 TEKNOSPRO 10
Pretreatment
Remove loose material, dirt and dust from the surface.
Application
Fill the screw holes and conseal the joints using a joint tape and water-borne filler SILORA J. Apply another layer of SILORA LF on screw holes and joint tape. Prime 1 x with waterborne primer TEKNOSPRO POHJA Primer. Topcoat 2 x with waterborne TEKNOSPRO 10 Wall paint.
PRODUCTS
TEKNOSPRO 10
A paint for interior walls and ceilings with low sheen. Easy to apply and gives a smooth finish.
TEKNOSPRO POHJA
An adhesion primer for wash and wear resistant top coats. Can be used as primer for dry interior spaces and as a top coat on ceilings and air conditioning pipes in dry spaces indoors.
SILORA LF
Ready-to-use, water-borne light all-purpose filler. Used for partial filling, filling of joints and overall skimming of walls and ceilings in dry interior areas.
More specific product information in technical data sheet. Painting system search recommends products based on the information you provide and does not take into account any specific needs of the site, e.g. the quality of the material to be painted or the properties of the previous paint. The main responsibility lies with the designer.
In case of doubt, please contact your local Teknos team.