UVILUX SEALER 1438-11
UV-Adhesion Sealer
- Sealer
UV-curing sealer for surface treatment of melamine, veneer, or solid wood.
Surface treatment of melamine, veneer or solid wood.
UVILUX SEALER 1438-11 is especially produced as a sealer, which is very easy to sand. Good adhesion to melamine.
Technical data sheet
Safety data sheet
- UVILUX SEALER 1438-11_HY 5590 CLEAR_2023-11-28_EU_en
- UVILUX SEALER 1438-11_HY 5590 CLEAR_2023-11-28_GB_en
- UVILUX SEALER 1438-11_HY 5590 CLEAR_2023-11-28_IE_en
- UVILUX SEALER 1438-11_HY 5590 CLEAR_2023-11-28_MT_en
- UVILUX SEALER 1438-11_HY 5590 CLEAR_2023-11-28_NI_en
- UVILUX SEALER 1438-11_MELAMIN SEALER TS 21068 CLEAR_2023-11-27_EU_en
- UVILUX SEALER 1438-11_MELAMIN SEALER TS 21068 CLEAR_2023-11-27_GB_en
- UVILUX SEALER 1438-11_MELAMIN SEALER TS 21068 CLEAR_2023-11-27_IE_en
- UVILUX SEALER 1438-11_MELAMIN SEALER TS 21068 CLEAR_2023-11-27_MT_en
- UVILUX SEALER 1438-11_MELAMIN SEALER TS 21068 CLEAR_2023-11-27_NI_en
Application conditions
On very resinous pine, special adhesion sealers such as UVILUX SEALER 1455-12 should be used.
Storage
Should not be exposed to temperatures above +40°C. Should not be exposed to direct sunlight. Must not freeze. The storage stability is shown on the label. Store in a tightly closed container.
The sealer cures under UV-radiation and may be sanded immediately upon curing.
| Solids | abt. 100 % by volume |
|---|---|
| Total mass of solids | abt. 1258 g/l |
| Volatile organic compound (VOC) | abt. 2 g/l |
| Thinner | The product is delivered ready for use. |
| Clean up | TEKNOSOLV 1129-11 |
| Safety markings | See safety data sheet. |